Many disinfectants are unable to penetrate oils, fats and protein based materials and cannot disinfect effectively in areas where these are present. Biocleanse™ Ultra cuts through contaminants, lifting them from surfaces and leaving a physically clean and disinfected surface in a single operation.

Biocleanse™ Ultra delivers effective cleaning with proven efficacy against a wide spectrum of pathogenic micro-organisms including bacteria, viruses, spores, moulds and fungi:

Widely used within the Pathology areas of the NHS, Biocleanse™ Ultra is available in Ready to Use, Wipe and Concentrate forms.

Biocleanse™ Ultra incorporates many innovative features including:

• Alcohol Free - Biocleanse™ Ultra is non flammable, not classified as hazardous and compatible with a wide range of surfaces including plastics, vinyl and rubbers.
• Combined Cleaner/Disinfectant - a single stage cleaning and disinfection process.
• Shelf Life - the active ingredient in Biocleanse™ Ultra is stable and does not degrade upon storage, unlike hypochlorite and peroxide based systems, providing a two year shelf life.
• Residual Activity - Independent tests on Biocleanse™ Ultra by the Health Protection Agency have proved that surfaces treated with Biocleanse™ Ultra retain their Biocidal activity for up to 28 days, unlike Alcohol, Chlorine and Peroxide based chemicals.

Use biocides safely. Always read the label and product information before use.

Dentisan Biocleanse Ultra FAQs

What is the advantage of a combined cleaner and disinfectant?

Because Biocleanse™ Ultra penetrates and removes a wide range of contaminants; the active ingredients reach their target more easily, giving a clean and disinfected surface in the minimum possible time. This removes the need to clean first and then disinfect. See also section 6.57 of HTM01-05

What is the products shelf life?

Biocleanse™ Ultra as supplied in both Concentrate and Ready to use forms has a 24 month shelf life. The active component does not break down in storage and, therefore, diluted solutions (5% or above) can be stored for the same period if diluted with clean water and kept free of contamination.

Why is Biocleanse Ultra more effective than alcohol based products?

• Alcohol based products have a strong odour in use.
• Alcohol based products are flammable.
• Alcohol is volatile and will evaporate if left in an open container.
• Alcohol binds blood and protein to surfaces. See section 6.57 of HTM01-05.
• Surfaces can be damaged by alcohols, especially plastics.
• Alcohol based products are not effective detergents.
• Alcohols provide no residual biocidal activity.

Why is Biocleanse Ultra better than chlorine based products?

• Chlorine is a disinfectant not a detergent.
• Chlorine based products have a strong odour in use.
• Care is needed to match the starting strength of the product used to the dilution required for the task in hand.
• Contact with acids liberates toxic chlorine gas.
• Chlorine does not blend together with detergents to make combined cleaner and disinfectant products.
• Chlorine solutions can bleach colours and damage surfaces.

Application techniques for Biocleanse™ Ultra on surfaces

• Biocleanse™ Ultra can be applied by several techniques depending on the item to be treated
  • Spray and wipe using a trigger spray
  • Wet wipe pre-impregnated with Biocleanse™Ultra
  • Immersion in Biocleanse™ Ultra solution with or without ultrasonic agitation
• To ensure suitability, always check the manufacturer’s recommendations for cleaning and disinfecting medical devices before use.
• The recommended procedure to follow for a visually attractive finish on high gloss or dark coloured surfaces is to use Biocleanse™ Ultra in trigger spray format and wipe with absorbent tissue to remove excess product.
• When using on high gloss surfaces product residue should be removed using a clean, dry cloth to minimise visible effects.
• Biocleanse Ultra is not suitable for use on porous or absorbent surfaces.